Why is Shure SM58 vocal microphone so popular? Here is an answer:
By recording live sound source with microphone , we have one inconsistency. This is around hum and unnecessary room ambient sounds. When we edit the sound, it`s easy to add effects, but eliminate these from original recordings is impossible without removing neseccary frequencies.
How to find solution to the problem?
Professional Sound Recording Studios used special panels to covering walls and roof. Also there are built in isolation booths which provide excellent sound control. For home usage these not a most handy solutions. However, if you have a fully separate room at home, you can design it like recording studio. But it`s very expensive settlement.
I was find a pretty good solution, works well for recording individual sound source.
Mic-Booth – a little booth, are installed around the microphone. This “tube“ are fixed with microphone to stand and are opened only in the direction of sound source. The mic-booth can eliminate room hum and unnecessary ambient sounds during recording process. Moreover, recording quality will be similar to professional studio.
And the best thing are: It can make without expensive spending.
I got the idea from Horlan Hagan, who made a “Porta-Booth“
– a portable recording booth, which is nice by mobile recording.
My general fiction was making a local recording booth, which have a possibility to install to usual mic stand. I needn`t it for portable usage not at all.
I decided to make it a round shape, because it`s more sightly for hang up. By rounded shape, it needs fewer makings and will be anymore lightweight for microphone stand.
Stuff needed for building a booth
- 1 sheet 50×600x600mm acoustic foam
- piece a fabric for casingl
- construction for fixing to stand
How to make a Mic-Booth
To get the best result, use two-inch thick ”Pyramid” style acoustic foam. It`s not good idea to replace it with mattress foam, which made for butt bump.
Optimal casing size: diameter 320mm & depth 320mm. I made it first unnecessarily depth, like can see on the upper picture.
First you need to do a little needle work, afterwards cut the foam fit to measure. You can get 4 suitable pieces from a foam list (2 for tube & 2 for rump). These pieces may hook up with carpet tape, here’s how you have again 2 pieces. Now can put foam into the tube and that’s done. Lastly, think how fix it to microphone stand. Probably, you find a best fitting solution for you. I was welding a construction by steel tube and wire.
My new Mic-Booth is done, and it works pretty well. Below can hear a difference by recordings with- and without a booth, used Samson C03 Condenser Microphone (switched to cardioid pattern).
I got just a new widget – Samson C03 Condenser Microphone. This is a dual 19mm capsule, large diaphragm condenser microphone, what should capacitate a good quality recording for affordable price. I made an exploration about different condenser microphones, before I was chosen in favor of Samson C03. My destination was finding out possibly good condenser microphone on tight budget. I be in need of mike for recording acoustic guitar and vocal and my first experiments proved, it`s really fit for these actions.
So, which properties this mike had?
Supposedly, this mike enables recording quality, which are similar to expensive condenser microphones. Yes, it feels good. Samson C03 is unidirectional condenser microphone, switchable to different pickup patterns: SuperCardioid, Omni and Figure 8. This appendage makes it universal, microphone is usable for different miking techniques, without having many apart microphones. Also, it has additionally 2 switches, one for limiting signal flow (-10dB pad switch) and a second is low-cut filter, which you can use to eliminate any unwanted low frequency reproduction. For one, this is useful by recording acoustic guitar, while setting a mike near the sound hole, will amplify low frequencies too much. A function helps to reduce this interference.
Likewise, Optional SP01 Spider Mount is tidy for additional isolation. It looks pretty and had a metal construction sure as hell. This one eliminates noises, which can carry over mike stand to mike diaphragm and may disturb a recording quality. Mike comes with a carry case & swivel mount included. If you will buy in a condenser microphone for vocal recording, then purchase immediately additional Pop Shield too. Also, it can make yourself, but believe me, you need it!
Forsooth, all promised properties are working correctly! Though I haven’t experienced with expensive condenser microphones, I can aver this Samson C03 is a good & sensitive condenser microphone. It can make all what I was expected, and I believe this mike be able to more.
Now, I can suggest Samson C03 for everyone, who need a good large diaphragm condenser microphone for affordable price.
Below you can see recording to test mike properties & sensitivity. Probably, it´s more credible, if only blablablaa. I was made this test in usual room, from distance about 1 foot to the microphone.
Loading ...
